3D Printing for Model Railways
3D Printing for Model Railways
This group is dedicated to bringing the worlds of model railways and... View more
Organizer:
- Organized by
-
-
Group Feed
-
ThatOneSouthernPacificGuy posted an update in the group
3D Printing for Model Railways 2 weeks ago2 weeks ago (edited)
Blue Box F59-PHI DCC conversion
I made some 3D printed decoder and speaker mounts for my athearn blue box F59-PHI locomotive. I put a decoder buddy with a blunami decoder and a soundtraxx oval speaker (hopefully i can upgrade it to Scale Sound Systems speakers soon). Im also in the process of making some mounts for athearns blue box SD40 lineup (excluding the SD40-2 for…
-
Hendel posted an update in the group
3D Printing for Model Railways 3 months ago3DRailroad.com
Has anyone here actually received an order from 3DRailroad.com? I’ve tried repeatedly (foolishly?) to place orders there over the last several months and have yet to receive anything, or even get a response to repeated email queries. Is the site just a (very) elaborate scam?
Alternately, can anyone point me at a good N-scale DeLorean time machine…
- View more comments
-
Ben_Fehr posted an update in the group
3D Printing for Model Railways 6 months agoI 3D printed all three of these buildings for my layout. The two on the left were 3D models I paid for (they’re pretty inexpensive, and most of the money goes to the creators). The one on the right is a custom remix I created of the one on left. I created and printed all of the interior detail for all three of them. There isn’t a drop of…
-
Ben_Fehr posted an update in the group
3D Printing for Model Railways 6 months agoReverse headlight for steam locomotive tender
When I converted this steam locomotive to DCC, I designed and printed a reverse headlight to hold a 3mm flat top led. Not SUPER prototypical-looking, but I think it turned out pretty well. If anyone is interested in it, let me know – I’ll upload it to thinginverse and post a link.
-
Ben_Fehr posted an update in the group
3D Printing for Model Railways 6 months ago6 months ago (edited)
Load platforms for Walthers Trainline Offset 4 Bay Hopper
I designed and printed a set of these platforms for adding loads to the Walthers Trainline Offset 4 Bay Hopper cars. Download it here if it would be useful to you! https://www.thingiverse.com/thing:7158252
- View more comments
-
Dielectric posted an update in the group
3D Printing for Model Railways 7 months agoHere’s a little waiting platform modeled from a Soviet bus stop I thought was cool. It’s in N scale but should re-scale anywhere you want to go. Easy to make on any old FDM printer.
I threw it up on Printables:
https://www.printables.com/model/1410343-kazakhstan-bus-stop
-
Ben_Fehr posted an update in the group
3D Printing for Model Railways 7 months agoI’ve designed a couple of 3D-printable models for my HO-scale layout this year, and have put the models up for free to download from Thingiverse. They are models of a modern-style house (patterned after my own home) and a midwest-style corn crib. I’ve gotten good feedback on the design and the ease of printing them, so go grab them if…
- View more comments
-
oorail posted an update in the group
3D Printing for Model Railways 7 months agoWelcome, this group is all about 3D printing for Model Railways and Model Railroads, in whatever scale you want to use.
- View more comments
